Skip to content
ZERO SCRIPTS
SnipingOn the Zen's screen: QUICK SCOPE

Quick Scope

Press L2 and it fires one shot for you after the scope delay.

What it does

Every time you press L2, Quick Scope waits SCOPE DELAY milliseconds, then holds R2 for FIRE HOLD milliseconds to fire one shot.

Set SCOPE DELAY to how long your scope takes to open, so the shot goes off right as you're scoped in.

Once it has started, it fires even if you let go of L2 before the delay is over.

When it runs

On each new press of L2.

QUICK SCOPESCOPE DELAY3202/3L/R O:BK
The Zen's screen with SCOPE DELAY selected, at its default.

Settings

In the order the Zen shows them. Each label is exactly what you'll see on its screen.

  1. 1.

    ENABLED

    Values
    OFF or ON
    Default
    OFF, unless you turned on “Default ON” for this mod in the generator.

    Switches the mod on or off. The screen shows ON or OFF; press D-pad left or right to flip it.

  2. 2.

    SCOPE DELAY

    Range
    120 to 600
    Default
    320
    Unit
    ms
    Each press
    ±10

    How long it waits after you press L2 before it fires, in milliseconds.

    • Raise it: It fires later. Raise it if the shot goes off before you're fully scoped in.
    • Lower it: It fires sooner. Lower it if you're scoped in and waiting for the shot.
  3. 3.

    FIRE HOLD

    Range
    30 to 150
    Default
    60
    Unit
    ms
    Each press
    ±1

    How long it holds R2 for the shot, in milliseconds.

    • Raise it: A longer trigger press. Raise it if the shot sometimes doesn't go off.
    • Lower it: A shorter trigger press.

Tune it in-game

Mods pause while the menu is open, so close it each time you want to test a change, then open it again to adjust.

  1. Hold L2 and press OPTIONS to open the menu.

  2. Press D-pad up or down until the screen shows QUICK SCOPE, then press Cross.

  3. On ENABLED, press D-pad right so it shows ON.

  4. Leave SCOPE DELAY at 320 and close the menu.

  5. Press L2 with a scoped gun and watch when the shot fires.

  6. If it fires before the scope is up, raise SCOPE DELAY by 20. If you're scoped in and waiting, lower it by 20. Then fine-tune by 10.

  7. If a shot sometimes doesn't go off, raise FIRE HOLD.

  8. When you're happy, hold L2 and press OPTIONS to close the menu. Your settings save to the Zen.

Tips and conflicts

  • It fires on every press of L2, even a quick tap. Switch ENABLED OFF from the menu when you're not using a scoped gun.
  • Scopes can open at different speeds, so one SCOPE DELAY may not suit every gun.

Conflicts

  • Aim Abuse keeps letting go of L2 while you aim, which can take you out of the scope. Don't use it with Quick Scope.

Build it in the generator

Switch on Quick Scope under Mods, set your starting values (and Default ON if you want it on from the start), then download your script. You can still change every value on the Zen afterwards.

Build it in the generator

ZERO SCRIPTS is not affiliated with Collective Minds. Using scripts may violate a game's terms of service. Use at your own risk.