Skip to content
ZERO SCRIPTS
FootballOn the Zen's screen: FINESSE BTN

One-Button Finesse Shot

One button fires a finesse shot with exactly the power you set, every time.

What it does

One-Button Finesse Shot does a finesse shot (R1 + Circle) when you press one button (R3 or L3, see BUTTON). It holds R1, then holds Circle for exactly POWER plus NET DELAY milliseconds, then lets go.

Shot power comes from how long Circle is held, so the same time gives the same power bar on every shot. 230 ms is a starting point, not a promise: calibrate it.

The button you pick no longer reaches the game while this mod is ON. Your normal R1 + Circle still works as always.

When it runs

Each time you press the chosen button while it's ON.

FINESSE BTNPOWER2302/4L/R O:BK
The Zen's screen with POWER selected, at its default. With weapon profiles on, the bottom right shows the active profile's name instead.

Settings

In the order the Zen shows them. Each label is exactly what you'll see on its screen.

  1. 1.

    ENABLED

    Values
    OFF or ON
    Default
    OFF, unless you turned on “Default ON” for this mod in the generator.

    Switches the mod on or off. The screen shows ON or OFF; press D-pad left or right to flip it.

  2. 2.

    POWER

    Per profile
    Range
    50 to 1000
    Default
    230
    Unit
    ms
    Each press
    ±5

    How long Shoot (Circle) is held, in milliseconds. This sets the power bar.

    • Raise it: More power: the shot is harder but can fly higher.
    • Lower it: Less power: a softer, more placed shot.
  3. 3.

    NET DELAY

    Range
    0 to 100
    Default
    0
    Unit
    ms
    Each press
    ±5

    Extra milliseconds added to the hold for online play, where your platform and connection can make shots come out weaker.

    • Raise it: Adds more hold online.
    • Lower it: Adds less. Keep it at 0 offline.
  4. 4.

    BUTTON

    Range
    0 to 1
    Default
    0
    Each press
    ±1

    The button that fires the shot.

    • 0R3 (press the right stick).
    • 1L3 (press the left stick).

Tune it in-game

Mods pause while the menu is open, so close it each time you want to test a change, then open it again to adjust.

  1. Hold L2 and press OPTIONS to open the menu.

  2. Press D-pad up or down until the screen shows FINESSE BTN, then press Cross.

  3. On ENABLED, press D-pad right so it shows ON.

  4. Close the menu and go to the practice arena. Shoot from the edge of the box with your button and watch the power bar.

  5. Too much power (the bar goes past where you want it)? Lower POWER by 10. Too little? Raise it by 10. Then fine-tune by 5.

  6. Online, if your shots feel weaker than in the practice arena, raise NET DELAY a little at a time. Offline, keep it at 0.

  7. When you're happy, hold L2 and press OPTIONS to close the menu. Your settings save to the Zen.

Weapon profiles

With weapon profiles on, hold L2 and press D-pad left or right to switch profile. On One-Button Finesse Shot, these settings have their own value in each profile:

  • POWER
  • In the generator, turn on Weapon profiles and name 2 or 3 profiles, for example one per gun. The settings marked “Per profile” then get their own value in each profile.
  • In-game, with the menu closed, hold L2 and press D-pad right for the next profile or D-pad left for the one before. The Zen shows PROFILE and the profile's name for a moment and gives a short rumble.
  • The menu always edits the active profile. On these mods the bottom right of the Zen's screen shows the active profile's name, so you know which one you're changing.
  • To tune a gun: switch to its profile, open the menu, change the values, then close the menu. Repeat for the next gun.
  • The Zen remembers which profile you were on, even after a restart. While you hold L2, D-pad left and right switch profiles and don't reach the game.
  • Each per-profile setting uses one save slot per profile. The Zen has 20, and the generator shows how many your build uses. Past 20, settings still work but go back to their built-in values when the Zen restarts.

Tips and conflicts

  • Finesse shots work best from the edge of the box toward the far corner. Most players use around 1 to 2 bars close in and 2 to 3 from the box.
  • In FC 27, how much a finesse shot curls depends on the shooter's attributes, so the same power can look different with different players.
  • Turn on Weapon profiles to keep two powers, for example one for close shots and one from range.

Conflicts

Build it in the generator

Switch on One-Button Finesse Shot under Mods, set your starting values (and Default ON if you want it on from the start), then download your script. You can still change every value on the Zen afterwards.

Build it in the generator

ZERO SCRIPTS is not affiliated with Collective Minds. Using scripts may violate a game's terms of service. Use at your own risk.